guide slot造句

Place it in the box so that the mark lines up with the guide slots.
Additionally the barrel has horizontal guide slots that help align and secure the handguards in place.
The bolt head is rotated by a control cam riding in a helical guide slot machined into the bolt carrier.
During the EVA on the return to Earth, he inspected the housing and found that guide pins were barely coming through the guide slot.
GM has made several modifications to the seat belt system, including using stronger belt webbing that was less susceptible to twisting and narrowing the belt webbing guide slot, the report said.
It's difficult to find guide slot in a sentence. 用guide slot造句挺难的

The angles are marked ( at any angle, not necessarily 45 degrees ) and the guide slots are cut with the same saw that will be used for the rest of the cutting.
When carpenters used to make their own mitre boxes, it was common to use a mitre box until its guide slots became worn and then make a new one out of scrap timber.
The fixed jaw can withstand bending stress far better than can the movable jaw, because the latter is supported only by the flat surfaces on either side of the guide slot, not the full thickness of the tool.
By adding a set of eccentrics and guide slots to the axle of the supercharger, the Powerplus actively controls the position of these vanes, such that they maintain a constant small clearance from the walls of the housing.
Shop and club tracks used for competition ( especially in 1 : 32 and 1 : 24 scales ) are usually hand built " Routed Tracks " in which the guide slots for the entire racecourse are chipboard or Medium-density fibreboard ) providing a smooth and consistent surface.
Additional guide slots, pins, notches, or holes may be used to aid in proper insertion of a component between other live components, while mechanical engagement latches, handles, or levers may be used to assist in proper insertion and removal of devices that either require large amounts of force to connect or disconnect, or to assist in the proper mating and holding together of power and communications connectors.